Knock Knock, WHo's There???

[04cobra408]

The UPS guys with my new WHIPPLE!!! :runaway: :runaway: :runaway: :runaway: :runaway: :runaway: :runaway: :runaway: :runaway: :runaway:

Hey droped it off yesterday and today my 2.75 pulley came in from LFP :rock:
Here are some pics i snapped today, and notice the magazine that just happen to be next to my blower with the hottie on thecover hahahhah
I'm Dropping the car off on the 20th to get everything installed!!!

pictures are from my iphone...
http://i25.photobucket.com/albums/c98/04cobra408/Picture011.jpg
http://i25.photobucket.com/albums/c98/04cobra408/Picture013.jpg
http://i25.photobucket.com/albums/c98/04cobra408/Picture010-1.jpg
http://i25.photobucket.com/albums/c98/04cobra408/Picture014.jpg



and they are waiting on the parts to start putting together the rear end so its ready to go right in when they get my car on the 20th. Its only supposed to ttake a week for them to get everything installed and whatnot but their guy that does custom cages is going to be putting a cage together for me so im not sure how long the car is going to be down yet but once i take the car up their AED the cage guy and i will decied what we are going to do for the cage and then ill know how long he is going to have the car.

[98GT4SC]

Saaaaaweeeeeeet:rock: :rock: :rock:

Oh yea, and the whipple is cool too :lol4: :lol4:

[04cobra408]

Hahahaha

[J's DDLY SNK]

That **** is tight buddy! Now you definately have to try out for the "PINKS All Out" show. No more 13's for Ef!!!!:rock:

[jlightning347]

Yeeeaaa Buddy!!

[Macher]

very nice Ef, oh the whipple looks good also, hahah:lol4:

[CA_BULLITTMAN]

That's WEAK!! :nonono1:



















She has too much clothes on......:lol4:

The blower looks sick though.....congrats buddy...:thumbsup:

[ponypinoy]

Nice!!!! :rock:

[Sptvenm]

Nice!!!! :rock:

whats up ben?! nice to see u around :patriot:

where u been? gonna come to knotts with us?

[Sptvenm]

sick foo! cant wait to see it when its done :patriot: :runaway:

[Jailtime]

Very Very nice.....Congrats

[BluByU]

You finally got it:thumbsup: Dang can't wait to see that monster!!!!

[02redgtconv.]

Dang Efren like that? Congrats on the new toy and now we know you should qualify at Pinks. I am going to that event and I sure hope you make it down.

[04cobra408]

Thanks guys!!! It took a lot longer than i thought to get my twinscrew but its finally here. :runaway:

[saleen249]

That looks pretty sick!

[04cobra408]

That looks pretty sick!


Thanks Buddy :patriot:

[jlightning347]

I got that blower pulley sun! Im going to get that thing looking sharp!:cool:

[97SnakeBite]

wish i had that kinda money to spare!!...but dont count me out. Hopefully by the end of summer i will have my MMR block and prochager

[Bluemeanie]

I would like to put a red super charger like that in my ranger will she pitch in for gas? :lol3:

[04cobra408]

I got that blower pulley sun! Im going to get that thing looking sharp!:cool:


:rock: going red like we were talking about is going to look sick when the pulley is spinning! :patriot:

[jlightning347]

:rock: going red like we were talking about is going to look sick when the pulley is spinning! :patriot:
:cool:

[04cobra408]

Update: Droped the car off on wed and the install should be done in about 2 weeks. I pm'd Jeff S about the tune so once he gets back to me ill know when my car will be ready to hit the streets and track!!!!!! I cant wait!!!!!

[CA_BULLITTMAN]

Update: Droped the car off on wed and the install should be done in about 2 weeks. I pm'd Jeff S about the tune so once he gets back to me ill know when my car will be ready to hit the streets and track!!!!!! I cant wait!!!!!

Lucky dog you...:thumbsup:

[jlightning347]

Cant wait man!

[04cobra408]

OK NOW after doing some work to the car and checking the spring rates and and discussing them with maximum , maximum says apex had on the complete wrong spring rates for me!!! they were to short (thats why it was so slammed!!!) and to soft so now im going to a strange set up , still coil overs but the RIGHT set up... Also i needed to upgraded to a new 26 input shaft and clutch since the stock shaft will not be able to handle all my power!!!

[04cobra408]

Lucky dog you...:thumbsup:

Cant wait man!


THANKS GUYS! AS SOON AS IT IS DONE YOU WILL GET TO SEE IT.

[BluByU]

OK NOW after doing some work to the car and checking the spring rates and and discussing them with maximum , maximum says apex had on the complete wrong spring rates for me!!! they were to short (thats why it was so slammed!!!) and to soft so now im going to a strange set up , still coil overs but the RIGHT set up... Also i needed to upgraded to a new 26 input shaft and clutch since the stock shaft will not be able to handle all my power!!!

Apex did WHAT????:nonono1: :getit:

[04cobra408]

here are a few shots of the new rear end, whipple and all the other parts i got installed. Thanks to drew @ A.E.D for what looks like clean work :rock:
Today drew took it to the chassis shop so the guy can start making my cage so the car should be done in two weeks and a day with Jeff S at the shop here in san jose and it will be done just in time for the april 6th cruise :runaway:

http://i25.photobucket.com/albums/c98/04cobra408/P3120048.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3120049.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3130054.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3130055.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3130057.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3130058.jpg

[04cobra408]

http://i25.photobucket.com/albums/c98/04cobra408/P3120052.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3120047.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3130060.jpg
http://i25.photobucket.com/albums/c98/04cobra408/P3120053.jpg

[Sptvenm]

:rock:

[CPViolation]

Oh, oh..
looks you will soon you'll be doing Mach1
Congrats bro, rock-on.
Jeff

[VISTA_BLUE_06]

"Holy CAtnappers Batman!" looking good bro :rock:
time to get some E.T's on that set up :thumbsup:

[04cobra408]

"Holy CAtnappers Batman!" looking good bro :rock:
time to get some E.T's on that set up :thumbsup:


oh yeah, ill also be getting these soon with some slicks for the track.... 15x10 or 15x8? i like10 haha
http://i25.photobucket.com/albums/c98/04cobra408/BilletSpecialtiesStreetLiteWheels-b.jpg
http://store.summitracing.com/egnsearch.asp?N=700+400106+325212+115+4294795084&autoview=sku


And a pair of these Mickey Thompson's et Drag Radials for the fr500s.
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=TK-3744R%20%20%20%20%20%20%201&comp=LRS

[VISTA_BLUE_06]

nice..... did you ever think of going with Bogarts for rears 15x10weighing 11lbs
per rim?

BTW, i think the "BRINKS" truck missed my house when all the money
for mods was getting distibuted :headbang: :11doh: :lol3:

[04cobra408]

nice..... did you ever think of going with Bogarts for rears 15x10weighing 11lbs
per rim?

BTW, i think the "BRINKS" truck missed my house when all the money
for mods was getting distibuted :headbang: :11doh: :lol3:

yeah these are at 16lbs each... What do the pro stars come in at?
hahah NoWife, No Kids, No bills ahahah all my money goes to my retirement, my car and savings for the house. Oh and a party my face off! haha jk

[Sptvenm]

oh yeah, ill also be getting these soon with some slicks for the track.... 15x10 or 15x8? i like10 haha
[IMG]http://i25.photobucket.com/albums/c98/04cobra408/BilletSpecialtiesStreetLiteWheels-b.jpg[IMG]
http://store.summitracing.com/egnsearch.asp?N=700+400106+325212+115+4294795084&autoview=sku[url]


And a pair of these Mickey Thompson's et Drag Radials for the fr500s.
[url]http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=TK-3744R%20%20%20%20%20%20%201&comp=LRS

those are sick.....who showed u those? :cool:

[Sptvenm]

prostars 15x10 weigh 15lbs

weight in back dont really matter anyway. its the front u have to worry bout. ;)

[CA_BULLITTMAN]

daaaaamn you make me sick....

I can't wait to see it, so I can hate you even more...lol:lol3:

[04cobra408]

those are sick.....who showed u those? :cool:


one of my homies! :patriot: :thumbsup:

[04cobra408]

prostars 15x10 weigh 15lbs

weight in back dont really matter anyway. its the front u have to worry bout. ;)


rotating mass son :lol3: weight matters a bit with the wheel, less weight to spin the wheel and tire , right :headscratch:

[04cobra408]

Thanks for all the compliments guys, and for all the suggestions and ideas also. :patriot:

[Sptvenm]

rotating mass son :lol3: weight matters a bit with the wheel, less weight to spin the wheel and tire , right :headscratch:

u could have a point....BUT u will also have the power to back it up. u can put 20's on that biatch and still be out! :lol3: just like my boys L, he has dubs.....he spins em still but then hooks and hes out :runaway: :rock:

so f it get those ones i showed u. weight wont really matter dude. :patriot:

[CPViolation]

Thanks for all the compliments guys, and for all the suggestions and ideas also. :patriot:
Solid axle. :nonono1: :coffee:
Another Cobra wasted with solid axle.
A shame.

[EVLSONC]

Looks sick bro. That rear end looks SOLID and that car is going to be a beast.

[Sptvenm]

Solid axle. :nonono1: :coffee:
Another Cobra wasted with solid axle.
A shame.

i cant see a cobra being meant for a road course with its IRS.

solid axle is how it shoulda came from the factory:11doh:

[CPViolation]

i cant see a cobra being meant for a road course with its IRS.

solid axle is how it shoulda came from the factory:11doh:
Not
It was designed to be a road racer not a 1320 machine.
Willie buy a Mach 1 if you want solid axle.
It's a waste otherwise.
Jeff

[CPViolation]

Solid axle. :nonono1: :coffee:
Another Cobra wasted with solid axle.
A shame.
Yes the STOCK IRS sucks.
Who is stock these days?
Folks who sell products like a solid axle set-up just want your money.
Griggs tried to pimp one on me.
You lose weight with live axle. Handling unless the track is flat as a pancake goes to IRS.
Have you ever taken a geometry course?
IRS stays more correct then old school solid axle.
Fast cars from whatever country of origin do not have solid axle.
Jeff

[saleen249]

rotating mass son :lol3: weight matters a bit with the wheel, less weight to spin the wheel and tire , right :headscratch:

Rotating mass does make a difference... that's why I have 20" wheels on my 07... :lol4:

BUT, honestly it does make a big difference. Great looking suspension and work

[saleen249]

The Cobra IRS from the factory is not that bad.... it just wasn't designed for hard launches off the line with tons of HP/ TQ. With some upgrades the stock IRS is pretty good. The IRS is much more of a "driver's/ road course" suspension than for all out drag. Almost every great performance car (Porsche, BMW, Lambo, Ferrari) these days uses a IRS.. so why doesn't Ford do it? COST.. it all comes down to COST... the savings to produce a good IRS would only add about $100-$200 per vehicle BUT x 120,000 cars and its alot of money saved by Ford...

The solid axle for the Mustang on the other hand is good for the Mustang when setup properly. Motor Trend called a Vortech'd Griggs Equipped Mustang the best handling Mustang they've ever driven back in about 2000 and ALOT of the media have said the Parnelli Jones Saleen Mustang is the best handling Mustang ever made with a Watts link in the rear end. Since the solid Axle has been around for so long many companies make good products to improve it including Griggs, Maximum, Saleen, Evolution Motorsports, Steeda, etc.

[04cobra408]

Solid axle. :nonono1: :coffee:
Another Cobra wasted with solid axle.
A shame.


I swore i was going to stick to the irs and get the level 5 axels to go with the upgrades i had already made to the irs. But with the way i will prob drive my car the solid will hold up better and the car will still be able to handle, I just wont have that great irs feel. but yeah i will def miss the irs!!! like i said i swore againts doing the swap for so long not to mention verts hop a whole lot more than the coupes so wheel hop would have been a big issue should i have stuck with the irs. to each his own.. :patriot:

[CPViolation]

I swore i was going to stick to the irs and get the level 5 axels to go with the upgrades i had already made to the irs. But with the way i will prob drive my car the solid will hold up better and the car will still be able to handle, I just wont have that great irs feel. but yeah i will def miss the irs!!! like i said i swore againts doing the swap for so long not to mention verts hop a whole lot more than the coupes so wheel hop would have been a big issue should i have stuck with the irs. to each his own.. :patriot:
It almost makes sense for you to do a swap because you like 1320's.
I remember how much wheel-hop you have/had.
Guess you can cuss me out for being a purist.
Did you know preproduction 1964.5 Mustang had IRS?
The bean counters nixed it.
Jeff

[jlightning347]

Damn homie that looks sweet!!! I want a ride when finished up still!:runaway:

[jlightning347]

http://i19.photobucket.com/albums/b197/famouskid34/P3120053.jpg

That pulley looks sssiiicccckkk!!! Looks really good on there brother!

[04cobra408]

It almost makes sense for you to do a swap because you like 1320's.
I remember how much wheel-hop you have/had.
Guess you can cuss me out for being a purist.
Did you know preproduction 1964.5 Mustang had IRS?
The bean counters nixed it.
Jeff


hey, i aint mad at ya :thumbsup: aint nothing wrong with being a purist.

[04cobra408]

http://i19.photobucket.com/albums/b197/famouskid34/P3120053.jpg

That pulley looks sssiiicccckkk!!! Looks really good on there brother!


Hell yeah! one of my homies with mad skillz hooked up that pulley :thumbsup:
now i need to get a red fuel cell cap for that coolant tank to match the pulley so there is a lil more red.

[CPViolation]

Hell yeah! one of my homies with mad skillz hooked up that pulley :thumbsup:
now i need to get a red fuel cell cap for that coolant tank to match the pulley so there is a lil more red.
Very nice bro.
Tupac said, "I ain't mad at you."
F the world..
J/k enjoy the fast car you have.
http://img204.imageshack.us/img204/5749/sunfunfire19263031122bj5.jpg
Opps forgot your dad owns a Vette. :)

[jlightning347]

The red fuel cell cap would look good bud!

[Sptvenm]

Very nice bro.
Tupac said, "I ain't mad at you."
F the world..
J/k enjoy the fast car you have.
http://img204.imageshack.us/img204/5749/sunfunfire19263031122bj5.jpg
Opps forgot your dad owns a Vette. :)

i think ur thinkin of steve

[04cobra408]

i think ur thinkin of steve


Yep, but my dad is a chevy guy. he has a 66 impala in the driveway and he just sold a 64 impala a few months back I used to love as a kid when he would do lil burn outs in the 67 maro he had!!!

[02redgtconv.]

That pully is off the hinge the red really stands out in front of the black blower.Looks good Efren is there a considerable difference between the super chargers?

[VISTA_BLUE_06]

hahah NoWife, No Kids, No bills ahahah all my money goes to my retirement, my car and savings for the house. Oh and a party my face off! haha jk


:lol3: LOL, i remember those dayz droppin mad cash for mods:cool: :rock:

BTW, El Presidente' when you roll in your whip, leave the purse catalog @ home
;) :11doh: LOL or in the box for your huffer.....:patriot:

[04cobra408]

:lol3: LOL, i remember those dayz droppin mad cash for mods:cool: :rock:

BTW, El Presidente' when you roll in your whip, leave the purse catalog @ home
;) :11doh: LOL or in the box for your huffer.....:patriot:


hahah

[VISTA_BLUE_06]

haha i just thought of an evil plan, ill tell my wife after spending xxx
amount of dollars for mod parts, the vendor will send a catalog of choice
for a free purse.....ill show her this thread and she will believe me since
you guys worked for the same company before.... heheheheheh :lol3:

[CPViolation]

hahah
Buy her a Infinity G35.
It comes equipped with a time-of-the-month Popcile.

[98GT4SC]

Pics look great buddy. Can't wait to see it in person........:rock:

[CamsnapperSC]

Bad.ass.

[2000BlackGT]

weight in back dont really matter anyway. its the front u have to worry bout. ;)
Comments like this should keep you in the General Discussion section.

[2000BlackGT]

Ef, when are you coming to pick up your coil overs?

[04cobra408]

Ef, when are you coming to pick up your coil overs?


swung by yesterday on my day off, just to late hahahah I work the rest of the week so i wont have time so Steve or Elliott will have to make it down to the shop. And hopefully today, i know they wanted to throw those bad boys on the car asap haha

[2000BlackGT]

Someone was here till 6, then i came back at 9PM, what time were you coming by, hot damn?! Just have someone call my cell before they come over. Make sure to bring a rag or something, they're pretty dirty.

[04cobra408]

Someone was here till 6, then i came back at 9PM, what time were you coming by, hot damn?! Just have someone call my cell before they come over. Make sure to bring a rag or something, they're pretty dirty.


i was over there around 4 . its all good no worries. Elliott will be caling you as i dont have time to go get them the rest of the week since i work 830-630ish

[STROKD]

Solid axle. :nonono1: :coffee:
Another Cobra wasted with solid axle.
A shame.
at least its torque arm and pan hard... it'd smoke my IRS in turns!:patriot: I just dont want to cut up my Cobra, I'm buying another something to go Full GR40 with.:runaway:

Looks great Ef!!! We gonna line em up on the 6th? I bet I keep a lot closer than you think...:hi:

[Sptvenm]

Comments like this should keep you in the General Discussion section.

how so? what u tryin to say? enlighten me...... :coffee:

[Twinkie]

how so? what u tryin to say? enlighten me...... :coffee:


I'm not sure, but I'm assuming... he means reguardless of where the weight is... weight is weight. doesnt matter where it is or how much. weight is weight. the more weight you have the more power it takes to move it.

[Sptvenm]

I'm not sure, but I'm assuming... he means reguardless of where the weight is... weight is weight. doesnt matter where it is or how much. weight is weight. the more weight you have the more power it takes to move it.

yes yes, i know but in ef's case it "wont really matter" never said it doesnt matter at all. he has the power to back it up +/- 2lbs wont really make a big diff.

rotating mass son :lol3: weight matters a bit with the wheel, less weight to spin the wheel and tire , right :headscratch:
u could have a point....BUT u will also have the power to back it up.:

[97SnakeBite]

Im goin tubular front in 2 months:D

[CPViolation]

at least its torque arm and pan hard... it'd smoke my IRS in turns!:patriot: I just dont want to cut up my Cobra, I'm buying another something to go Full GR40 with.:runaway:

Looks great Ef!!! We gonna line em up on the 6th? I bet I keep a lot closer than you think...:hi:
Yea, that's why I didn't have the roll cage installed.
The floor pan has to be hacked to complement the rest of the GR-40 set-up.
Like in your case I would rather buy I car that is already done so I don't feel the pain of a cutting torch nailing the floor board.

[04cobra408]

Yea, that's why I didn't have the roll cage installed.
The floor pan has to be hacked to complement the rest of the GR-40 set-up.
Like in your case I would rather buy I car that is already done so I don't feel the pain of a cutting torch nailing the floor board.


got the cage goin in as we speak. :D

[04cobra408]

at least its torque arm and pan hard... it'd smoke my IRS in turns!:patriot: I just dont want to cut up my Cobra, I'm buying another something to go Full GR40 with.:runaway:

Looks great Ef!!! We gonna line em up on the 6th? I bet I keep a lot closer than you think...:hi:


THanks matt, but im sure you'll keep up even better than YOU think also hahah i dont lie, im still a rookie i have much to learn and tons of actual seat time i need to pile up. :thumbsup:

[STROKD]

Yea, that's why I didn't have the roll cage installed.
The floor pan has to be hacked to complement the rest of the GR-40 set-up.
Like in your case I would rather buy I car that is already done so I don't feel the pain of a cutting torch nailing the floor board.
nah i already did that to my 86, have pics of it torn apart, but i didnt want to do that to a orange Cobra... I'll leave it mostly stock and build another street toy.

[STROKD]

THanks matt, but im sure you'll keep up even better than YOU think also hahah i dont lie, im still a rookie i have much to learn and tons of actual seat time i need to pile up. :thumbsup:
nah you'd walk me, but my little non ported eaton will do alright...

did you sell the steggy yet?:hi:

[04cobra408]

nah you'd walk me, but my little non ported eaton will do alright...

did you sell the steggy yet?:hi:

haha yeah haha

Re: steggy, I think shuan had someone who was looking for a ported blower but i have not heard back yet.

[CPViolation]

got the cage goin in as we speak. :D
Ef, your car is getting nasty.
Congrats.
Jeff

[STROKD]

haha yeah haha

Re: steggy, I think shuan had someone who was looking for a ported blower but i have not heard back yet.
your port is sold and Shaun has one for sale? I'd consider getting one if it was cheap enough. I paid 5 bills for my last one.

[04cobra408]

your port is sold and Shaun has one for sale? I'd consider getting one if it was cheap enough. I paid 5 bills for my last one.

sorry i meant drew mentioned shaun knew some one looking for a used one for sale and asked if mine was up for sale. i said sure if the offer is decent, but havent heard anything yet since i really wasnt sure waht to ask for the whole set up.I was thinking of selling as the blower with 2.76 billett flow pulley, bbk throttle body & ported inlet

[STROKD]

sorry i meant drew mentioned shaun knew some one looking for a used one for sale and asked if mine was up for sale. i said sure if the offer is decent, but havent heard anything yet since i really wasnt sure waht to ask for the whole set up.I was thinking of selling as the blower with 2.76 billett flow pulley, bbk throttle body & ported inlet
That would work! I have a BF TB and inlet brand new in a box that I haven't put on yet, so I would only want the charger... If you can't sell it to this other dude, let me know...:hi:

Oh and I'd want the pulley too if it is black.

[04cobra408]

That would work! I have a BF TB and inlet brand new in a box that I haven't put on yet, so I would only want the charger... If you can't sell it to this other dude, let me know...:hi:

Oh and I'd want the pulley too if it is black.


Cool, ill let you know bud :patriot: BUt the pulley is the "clear" color. you know basically silver.

[J's DDLY SNK]

The car is coming out freaken sweet Ef! Nice job buddy, can't wait to see and hear it!:rock:

[04cobra408]

The car is coming out freaken sweet Ef! Nice job buddy, can't wait to see and hear it!:rock:


thanks Bud :patriot:

[STROKD]

thanks Bud :patriot:
So the vert isn't done yet? If it is, PM me, Willie and I are going to Bux tonight...:hi:

[Sptvenm]

So the vert isn't done yet? If it is, PM me, Willie and I are going to Bux tonight...:hi:


:rock: and my friend with his L

[04cobra408]

So the vert isn't done yet? If it is, PM me, Willie and I are going to Bux tonight...:hi:


Na, the cage should be done this week i think, then its off to AED San jose for Jeff to tune it .

[BluByU]

Na, the cage should be done this week i think, then its off to AED San jose for Jeff to tune it .


Got any pics????

[04cobra408]

MAn i dont have any new pics ... And i already dropped it off with jeff (only had it for 48hrs hahah) for the tune. BUt man the cage came out so sick!!! The custom work was well worth it!!! Drew's cage guy did an amazing job imo.

ANd the work Drew did was great! He finished on time ( i lagged on getting the car to him when i dropped it offf originally) and man did he do a fine job! I really recomend AED if you want to get any work done! when i find the good shops I stand by them and recomend their services. AED is one of one or 2 others I recomend along with Elliott!! So if you want to upgrade Give the guys a call!!!
They are great to work with by the way! and they really really know how to build cars!! the knowledge Drew, Shawn , & Jeff have is amazing.

They also take the time to listen to what you want and to answer any and all questions you may have. Or if you want to just take them your ride and say do your magic, that is another great option and AED is prob the only place right now that i would actually let do that. so when i need a motor im just going to tell them do you thang haha

As far as how the car feels or whatnot..... I only drove it the night i picked it up i drove it 2 blocks and then from my house to AED's shop w/ the dyno by Santa Clara Univ yesteday and man i love the way ithe car feels so far!!! the suspension feels amazing! The throttle response was crazy! i cant wait till it is tuned!!!!!!!!! Its

[BluByU]

MAn i dont have any new pics and i already dropped it off with jeff (only had it for 48hrs) for the tune. BUt man the cage came out so sick!!! ANd the work Drew did was great! HE finished on time ( i lagged on getting the car to him) and did a fine job! i only drove it from my house to AED's shop by Santa Clara Univ and the night i picked it up i drove it 2 blocks and man i love the way it feels!!! the suspension feels amazing! The throttle was crazy! i cant wait till it is tuned!!!!!!!!! Its no irs but i was shocked by how it rides. it really is a great ride and great feel and i will be able to launch at the track!

Yup with a solid axle that thing is a whole different animal!!!!!! Don't forget to keep us updated!!!!!..........Can't wait to check it out!!!!!!

[04cobra408]

Yup with a solid axle that thing is a whole different animal!!!!!! Don't forget to keep us updated!!!!!..........Can't wait to check it out!!!!!!


oh yeah ill def show you when its all done. I love the solid axel so far, imagine when i launch on it , i know i will love it even more with out wheel hop!!

[jlightning347]

Dude, cant wait!!!:runaway: :runaway:

[svtcali2010]

Dude, cant wait!!!:runaway: :runaway:


+1 :rock: