Go Back   NorCal SVTOA Forums > Featured Forums > News

News Only admins & club oficers can start threads in this forum since these posts show up on the front page (requires admin approval). Members are more then welcome to post followups.

Reply
 
Thread Tools Display Modes

2015 ford mustang
Old 12-05-2013, 08:53 PM   #1
me32
BEASTLY SHELBY GT500 TVS
 
me32's Avatar
 
me32 is offline
Join Date: Sep 2009
Location: Fairfield
Posts: 9,643
Default 2015 ford mustang







http://www.netcarshow.com/ford/2015-mustang_gt/

Ford Mustang GT

The way Mustang looks, drives and sounds is key to the visceral experience that makes drivers just want to get in and hit the road. With more options to choose from, there is a Mustang to fit any lifestyle. The upgraded V6 and V8 are joined by an all-new 2.3-liter EcoBoostŪ engine that brings state-of-the-art technology to Mustang.

Ford Mustang GT continues with the latest edition of the throaty 5.0-liter V8, now featuring an upgraded valvetrain and cylinder heads that yield more than 420 horsepower (426 PS) and 390 lb.-ft. (529 Nm) of torque. A new intake manifold improves low-speed breathing for better fuel economy, idle stability and emissions.

"This EcoBoost engine delivers where a Mustang driver expects it to, with a broad, flat torque curve that pours out when you stand on it for easy passing or hustling down a twisty road," said Dave Pericak, Ford Mustang chief engineer.

The Mustang EcoBoost engine uses direct injection, variable cam timing and turbocharging to deliver plenty of usable performance and projected segment-leading fuel efficiency. A unique intake manifold and turbocharger housing enable it to deliver the performance Mustang drivers expect with output projected at more than 305 horsepower (309 PS) and 300 lb.-ft. (407 Nm) of torque.

With at least 300 horsepower (304 PS) and 270 lb.-ft. (366 Nm) of torque on tap from the standard 3.7-liter V6, even the most accessible Mustang delivers the performance customers expect.

Drivers will appreciate smoother shifts from the updated manual gearbox, while a reworked automatic transmission features new steering wheel-mounted shift paddles for drivers who want the choice between convenience and control.

Most nimble pony ever

When life throws drivers a curve, the all-new Mustang sets new handling benchmarks for the brand, delivering world-class dynamics and ride quality.

"We already set a very high standard for Mustang's dynamics with Boss 302, and our goal was to go above and beyond that with this new car," said Pericak.

Mustang features all-new front and rear suspension systems. At the front, a new perimeter subframe helps to stiffen the structure while reducing mass, providing a better foundation for more predictable wheel control that benefits handling, steering and ride.

The new double-ball-joint front MacPherson strut system also enables the use of larger, more powerful brakes. This is expected to be the best stopping Mustang yet, with three available brake packages.

At the rear is an all-new integral-link independent rear suspension. The geometry, springs, dampers and bushings all have been specifically modified and tuned for this high-performance application. New aluminum rear knuckles help reduce unsprung mass for improved ride and handling.

The feeling of freedom and confidence Mustang instills in its drivers is amplified when they can take control of how the car behaves. On a twisty back road or a weekend track day, the driver can tap the toggle switches on the console to quickly adjust steering effort, engine response, and transmission and electronic stability control settings using the available Selectable Drive Modes to create the perfect Mustang at any time.

The advanced new Ford-developed stability control system is tuned to maximize Mustang's dynamic capabilities. When the time comes to turn up the wick at the track, Ford Mustang GT includes standard launch control that enables drivers to achieve smooth, consistent starts every time.

The new 2.3-liter EcoBoost engine brings turbocharging to the Mustang powertrain lineup. Designed to meet the needs of drivers looking for outstanding performance and projected best-in-class fuel efficiency, this EcoBoost engine has been developed specifically for Mustang. The intake manifold and turbocharger housing are optimized to provide better breathing and higher output in Mustang.

With a projected 305-plus horsepower and 300-plus lb.-ft. of torque, this EcoBoost engine fits the bill for a true Mustang powerplant.

"This EcoBoost engine delivers the healthy output that Mustang drivers expect regardless of the speed," said Scott Makowksi, EcoBoost powertrain engineering manager. "This EcoBoost engine might be small in displacement, but it delivers where a Mustang driver expects it with a broad, flat torque curve and great driveability under any conditions."

The newest member of Ford's global family of EcoBoost engines, the 2.3-liter continues to take advantage of state-of-the-art technologies including direct fuel injection, twin independent variable camshaft timing and turbocharging to produce big-engine power and torque with improved fuel efficiency.

This is the first Ford engine to utilize a low-inertia twin-scroll turbocharger that provides quicker boost response while enabling lower emissions and improved efficiency. The cylinder head features an integrated exhaust manifold that separates the inner and outer pairs of cylinders into each inlet passage to the turbo.

Keeping the exhaust pulses separated from the next cylinder in the firing order eliminates mixing losses and maximizes pulse energy to the turbine wheel. The result is quicker torque delivery when the driver needs it for passing maneuvers and similar performance to a twin-turbocharger configuration.

The separated exhaust ports also enable the exhaust valves to stay open longer for reduced pumping losses that improve specific fuel consumption by about 1 percent.

With more than 305 horsepower and 300 lb.-ft. of torque pumped out from such a small engine, in a car where drivers are more inclined to use it, ensuring durability was critical. Enhancements to the Mustang EcoBoost engine to withstand the added stresses include:
•Forged-steel crankshaft
•Piston-cooling jets
•Steel piston ring carriers
•Premium bearing materials
•Upgraded valve seat materials
•Forged-steel connecting rods
•High-pressure die-cast aluminum cylinder block with ladder-frame bearing caps
•Deep-sump, die-cast aluminum oil pan

No Ford Mustang engine lineup would be complete without a great V8 engine at its core. The 5.0-liter V8 powers into a new generation with a host of upgrades that enable it to breathe better, especially at higher engine speeds. Many of these changes are derived from the lessons learned in developing the special edition 2013 Mustang Boss 302.

Getting air into the cylinders and exhaust out is the key to generating more power and torque from any engine, and that has been the focus of development on the V8, which features:
•Larger intake valves
•Larger exhaust valves
•Revised intake camshafts
•Revised exhaust camshafts
•Stiffer valve springs - ensures that the valves close completely at high rpm
•New cylinder-head casting - revised ports that provide a straighter path to the valves for less-restrictive intake and exhaust flow; combustion chamber modifications accommodate larger valves
•Sinter forged connecting rods - lighter and more durable for high-rpm operation
•Redesigned piston tops - deeper cutouts clear the new larger valves
•Rebalanced forged crankshaft - supports higher-rpm operation

These upgrades are projected to generate more than 420 horsepower and 390 lb.-ft. of torque.

A new intake manifold includes charge motion control valves to partially close off port flow at lower engine speeds. This increases the air charge tumble and swirl for improved air-fuel mixing. This results in better fuel economy, idle stability and lower emissions.

The variable camshaft timing on the intake side now has a greater range of adjustment available thanks to mid-lock phasers. This enables better optimized control of the valve timing over a broader range of engine speeds and loads for improved fuel economy and emissions

Transmissions
The Getrag manual has a new shift linkage design for shorter throws and improved precision. The shift lever is now positioned closer to the driver and away from the cup-holders so the driver has a clear path for shifting.

Mustang blends outstanding all-around performance and everyday usability. Drivers who prefer to let the car handle the shifting during their daily work run, but still want to take control when the roads get twisty, will appreciate the new steering-wheel-mounted shift paddles with rev-matching downshifts that are now standard with the Select-Shift six-speed automatic transmission.

The automatic also features a redesigned case with cast-in ribs that help make it stiffer and reduce the weight. Internally clutches have been optimized and operating temperature has been increased to reduce friction. The output shaft is now supported by a ball-bearing that enables a top speed of 155 mph for Mustang GT.
__________________
2008 Shelby GT500
2921 out of 6513 coupes
132 of 314 Alloy Metallic

Shelby Dash Plaque,FRPP TVS Super power pack ,Drag Pack,SVT handling pack,FRPP Cobra Jet TB/MAF/80lb injectors,J&M UCA,LCA,Adj.PHB,SFC,PH A/D,O/R H, DynoMax 3in,CHE, Shelby Rad/HE,VMP 2.59,KB BAP,L&M plenum,BMR KMEMEBER,AED CUSTOM RETURN STYLE FUEL SYSTEM.
91/E85 tune by SHAUN AT AED
700HP/700TQ ON E85
10.78 @ 129MPH 1.644 60FT

2014 Fiesta ST Green Envy Tricoat
2014 Tuxedo Black Fusion

WWW.AEDHP.COM
  Reply With Quote

Old 12-05-2013, 08:56 PM   #2
cobrakidz
2 snakes and 2 cats
 
cobrakidz's Avatar
 
cobrakidz is offline
Join Date: Dec 2008
Location: Sacramento
Posts: 4,807
Default

Not too bad looking but I will need to see it in person.
__________________
13 Boss 302
66 GT 350
65 Tiger
  Reply With Quote

Old 12-05-2013, 08:58 PM   #3
me32
BEASTLY SHELBY GT500 TVS
 
me32's Avatar
 
me32 is offline
Join Date: Sep 2009
Location: Fairfield
Posts: 9,643
Default

Quote:
Originally Posted by cobrakidz View Post
Not too bad looking but I will need to see it in person.
I will agree in person would be best
__________________
2008 Shelby GT500
2921 out of 6513 coupes
132 of 314 Alloy Metallic

Shelby Dash Plaque,FRPP TVS Super power pack ,Drag Pack,SVT handling pack,FRPP Cobra Jet TB/MAF/80lb injectors,J&M UCA,LCA,Adj.PHB,SFC,PH A/D,O/R H, DynoMax 3in,CHE, Shelby Rad/HE,VMP 2.59,KB BAP,L&M plenum,BMR KMEMEBER,AED CUSTOM RETURN STYLE FUEL SYSTEM.
91/E85 tune by SHAUN AT AED
700HP/700TQ ON E85
10.78 @ 129MPH 1.644 60FT

2014 Fiesta ST Green Envy Tricoat
2014 Tuxedo Black Fusion

WWW.AEDHP.COM
  Reply With Quote

Old 12-05-2013, 09:41 PM   #4
Reeper
Member
 
Reeper's Avatar
 
Reeper is offline
Join Date: Jan 2013
Location: Solano, CA
Posts: 64
Default

Are we just going to gloss over the fact they moved the cupholders? It's about goddamn time.
__________________
  Reply With Quote

Old 12-05-2013, 09:47 PM   #5
me32
BEASTLY SHELBY GT500 TVS
 
me32's Avatar
 
me32 is offline
Join Date: Sep 2009
Location: Fairfield
Posts: 9,643
Default

Quote:
Originally Posted by Reeper View Post
Are we just going to gloss over the fact they moved the cupholders? It's about goddamn time.
hahaha
__________________
2008 Shelby GT500
2921 out of 6513 coupes
132 of 314 Alloy Metallic

Shelby Dash Plaque,FRPP TVS Super power pack ,Drag Pack,SVT handling pack,FRPP Cobra Jet TB/MAF/80lb injectors,J&M UCA,LCA,Adj.PHB,SFC,PH A/D,O/R H, DynoMax 3in,CHE, Shelby Rad/HE,VMP 2.59,KB BAP,L&M plenum,BMR KMEMEBER,AED CUSTOM RETURN STYLE FUEL SYSTEM.
91/E85 tune by SHAUN AT AED
700HP/700TQ ON E85
10.78 @ 129MPH 1.644 60FT

2014 Fiesta ST Green Envy Tricoat
2014 Tuxedo Black Fusion

WWW.AEDHP.COM
  Reply With Quote

Old 12-05-2013, 11:22 PM   #6
5150_GT
Sac Chapter Director
Asteroids Champion
 
5150_GT's Avatar
 
5150_GT is offline
Join Date: Jan 2013
Location: Roseville
Posts: 336
Default

honestly, if i can get this job i want, ill would be down for a lease on a 2.3 eco
__________________
2007 Grabber Orange GT
5.0 3v - Vortech V3 - Ford Racing stage 1 Heads - 127350 Comp Cams
E85 - AED Tune - ID 1000's - Magnaflow High-Flow X-Pipe
Dual Shelby Fuel pumps - CMDP's
FR500s Mufflers - Full Suspension as well!

  Reply With Quote

Old 12-06-2013, 04:05 PM   #7
snkbite
KORNFED_GET SOME
 
snkbite's Avatar
 
snkbite is offline
Join Date: Apr 2011
Location: NTH,CA
Posts: 343
Default

That don't even look like the mustang...
__________________
2003 SvT Cobra


Build Motor | 2.9 Whipple | E85 | Kooks Lg | MagnaFlow | #ID1000's | Accufab SB | JLT next Gen | Ported Heads | Fore Fuel |
LFP Head MOD | H&R Sports | T56 Magnum | Spec 3+ | IRS Brace | Ford GT Cams | BA 3000 | twin 465's
  Reply With Quote

Old 12-06-2013, 08:08 PM   #8
me32
BEASTLY SHELBY GT500 TVS
 
me32's Avatar
 
me32 is offline
Join Date: Sep 2009
Location: Fairfield
Posts: 9,643
Default

Quote:
Originally Posted by snkbite View Post
That don't even look like the mustang...
So do you like it
__________________
2008 Shelby GT500
2921 out of 6513 coupes
132 of 314 Alloy Metallic

Shelby Dash Plaque,FRPP TVS Super power pack ,Drag Pack,SVT handling pack,FRPP Cobra Jet TB/MAF/80lb injectors,J&M UCA,LCA,Adj.PHB,SFC,PH A/D,O/R H, DynoMax 3in,CHE, Shelby Rad/HE,VMP 2.59,KB BAP,L&M plenum,BMR KMEMEBER,AED CUSTOM RETURN STYLE FUEL SYSTEM.
91/E85 tune by SHAUN AT AED
700HP/700TQ ON E85
10.78 @ 129MPH 1.644 60FT

2014 Fiesta ST Green Envy Tricoat
2014 Tuxedo Black Fusion

WWW.AEDHP.COM
  Reply With Quote

Old 12-06-2013, 09:55 PM   #9
EVLSONC
Senior Member
 
EVLSONC's Avatar
 
EVLSONC is offline
Join Date: Jun 2007
Location: San Jose, CA
Posts: 1,149
Default

It actually looks pretty nice in the pics you posted compared to the initial ones released. Not as "fusion" as I imagined. I have a feeling it will look bad ass in person. Disappointed in the hp and center console doesn't do it for me. Really curious how this platform will evolve over the next couple of years. Might consider one down the line.
  Reply With Quote

Old 12-06-2013, 10:04 PM   #10
98 Saleen Cobra
USCG
 
98 Saleen Cobra's Avatar
 
98 Saleen Cobra is offline
Join Date: Aug 2010
Location: Campbell, CA
Posts: 2,963
Default

Highly dislike... I hope to god that they change the rear end, but I doubt they will.. I'll stick with my 98, and I won't get anything newer than a 2014..
__________________
98 Cobra - AED Built Motor - Foxlake Racing - Accufab Racing - Holley Dominator ECU - Racepak IQ3 - Griggs Racing - Vortech - Kooks - Weldon - T56 Magnum - Built Rear End - HRE's - Baer - C&R - E-85
AEDHP
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 10:41 AM.


vBulletin skins developed by: eXtremepixels
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ? 2006-2009 NorCalSVTOA.com All Rights Reserved
Reproduction of any part of this website without express written consent by NorCalSVTOA.com
or it's authorized agents is illegal and strictly prohibited.